Sn
TIN
(Anglo-Saxon, tin; L. stannum)
Sn at. wt. 118.69
at. no. 50
m.p. 231.89°C
b.p. 2270°C
sp. gr. 5.75 (gray)
sp. gr. 7.31 (white)
valence 2, 4.
Electronic configuration
| SHELL |
K |
L |
M |
N |
O |
P |
Q |
| SUB SHELL |
He |
Neon |
Argon |
Krypton |
Xenon |
Radon |
Eka-radon |
| 1s |
2s 2p |
3s 3p |
3d 4s 4p |
4d 5s 5p |
4f 5d 6s 6p |
5f 6d 7s 7p |
| Tin
|
1s22s22p63s23p63d104s24p64d105s25p2 |
|
|
| Symbol
|
3P0 |
Tin was Known to the ancients. Tin is
found chiefly in cassiterite ( SnO2 ). Most of the world's
supply comes from Malaya, Bolivia, Indonesia, the Republic
of the Congo, Thailand, and Nigeria. The U.S. produces
almost none, although occurrences have been found in
Alaska and California. Tin is obtained by reducing the ore
with coal in a reverberatory furnace. Ordinary tin is composed of nine stable isotopes. Thirteen unstable isotopes are
also known. Ordinary tin is a silvery white metal, is malleable, somewhat ductile, and has a highly crystalline structure. Due to the breaking of these crystals, a "tin cry" is
heard when a bar is bent. The element has two or perhaps
three allotropic forms. On warming, gray or a tin, with a
cubic structure, changes at 13.2°C into white or fi tin, the
ordinary form of the metal. White tin has a tetragonal
structure. Some authorities believe a y form exists between
161°C and the melting point; however other authorities
discount its existence. When tin is cooled below 13.20C, it
changes slowly from white to gray. This change is affected
by impurities, such as aluminum and zinc, and can be
prevented by small additions of antimony or bismuth. This
change from the a to fi form is called "the tin pest". There
are few if any uses for gray tin. Tin takes a high polish and
is used to coat other metals to prevent corrosion or other
chemical action. Such tin plate over steel is used in the so-called tin can for preserving food. Alloys of tin are very
important. Soft solder, type metal, fusible metal, pewter,
bronze, bell metal, Babbitt metal,. White metal, die casting
alloy, and phosphor bronze are some of the important alloys
using tin. Tin resists distilled, sea, and soft tap water, but is
attacked by strong acids, alkalis, and acid salts. Oxygen in
solution accelerates the attack. When heated in air, tin
forms Sn02, which is feebly acid, forming stannate salts
with basic oxides. The most important salt is the chloride
(SnCl2. H2O), which is used as a reducing agent and as a
mordant in calico printing. Tin salts sprayed onto glass are
used to produce electrically conductive coatings on the
glass. These have been used for panel lighting and for frostfree windshields. Of recent interest is a crystalline tin-niobium alloy that is superconductive at very low temperatures. This promises to be important in the construction
of superconductive magnets that generate enormous field
strengths, but use practically no power. Such magnets, made
of tin-niobium wire, weigh but a few pounds and produce
magnetic fields, when started with a small battery, that are
comparable to that of a lOO A on electromagnet operated
continuously with a large power supply. The small amount
of tin used in canned foods is quite harmless. The agreed
limit of tin content in U.S. foods is 300 mg. per kg. The
trialkyl and triaryl tin compounds, are used as biocides and
must be handled carefully. Tin prices have varied from 50¢
to about 2.00/lb. over the past 25 yrs. It presently costs
about $1.90/lb.

© 1999 F. Davies
Delphi O.E.M. Co.
All rights reserved